Organization
 
Log In
Basemap Data

Files

Tables

Tiles

Files
24

What you upload. Files are the raw material — run a job against one to turn it into a table or a tile.

City_Boundaries.zip

v0
2 hours ago

Example Fire: Run 1 (2026-10-27 15:58)

Built 2 hours ago
Fire run for the simulation "Example Fire", from Simulations.
v0
2 hours ago

Example Fire: Run 1 — Burning edge by time

Built 2 hours ago
The part of the fire's edge still burning at each time step: next to ground the front reached within the step or not yet in the black (worked out in DuckDB from the arrival and cooled tables). An edge stopped by a treatment drops out once it cools. Written by each run of the fire simulation whose output file is "Example Fire: Run 1 (2026-10-27 15:58)".
v0
2 hours ago

Example Fire: Run 1 — Fire pathways

Built 2 hours ago
The main routes the fire took: its arrival time read like a DEM, each cell stepping back to the neighbour the fire came from, and the ways most of the burned area ran through kept. `use` counts the burned cells whose way back runs through a piece and `share` is that over all of them: the higher, the more the fire ran that way. Written by each run of the fire simulation whose output file is "Example Fire: Run 1 (2026-10-27 15:58)".
v0
2 hours ago

Example Fire: Run 1 — Perimeters by time

Built 2 hours ago
The fire's extent at each time step of the run, one polygon per step, cumulative. Filter on `hours` or `clockTime` to pick one perimeter. Written by each run of the fire simulation whose output file is "Example Fire: Run 1 (2026-10-27 15:58)".
v0
2 hours ago

Example Fire: Run 1 — Spot landings

Built 2 hours ago
Where each spotting source's farthest ember lands, as points, with the same columns as Spotting. `spotFire` true: landed outside the fire, ahead of the front. Written by each run of the fire simulation whose output file is "Example Fire: Run 1 (2026-10-27 15:58)".
v0
2 hours ago

Example Fire: Run 1 — Spotting

Built 2 hours ago
Embers, one line per spotting source: from a burning cell with a maximum spot distance to where its farthest ember lands (FlamMap's maximum spot distance and direction under the run's wind, not the engine's random draws). `minutes` when the source burned, `distanceMeters`, `fireType` 1 surface / 2 passive crown / 3 active crown at the source, `landingMinutes` when the fire reached the landing, `spotFire` true when the landing was outside the fire at the time (worked out in DuckDB against the arrival table). The longest in each part of the fire when there are more than a map can draw. Written by each run of the fire simulation whose output file is "Example Fire: Run 1 (2026-10-27 15:58)".
v0
2 hours ago

Example Fire: Run 2 (2026-10-27 16:11)

Built 2 hours ago
Fire run for the simulation "Example Fire", from Simulations.
v0
2 hours ago

Example Fire: Run 2 — Assets reached

Built 2 hours ago
Every asset the fire reached, with the minute and the clock time it did. Written by each run of the fire simulation whose output file is "Example Fire: Run 2 (2026-10-27 16:11)".
v0
2 hours ago

Example Fire: Run 2 — Burning edge by time

Built 2 hours ago
The part of the fire's edge still burning at each time step: next to ground the front reached within the step or not yet in the black (worked out in DuckDB from the arrival and cooled tables). An edge stopped by a treatment drops out once it cools. Written by each run of the fire simulation whose output file is "Example Fire: Run 2 (2026-10-27 16:11)".
v0
2 hours ago

Example Fire: Run 2 — Fire pathways

Built 2 hours ago
The main routes the fire took: its arrival time read like a DEM, each cell stepping back to the neighbour the fire came from, and the ways most of the burned area ran through kept. `use` counts the burned cells whose way back runs through a piece and `share` is that over all of them: the higher, the more the fire ran that way. Written by each run of the fire simulation whose output file is "Example Fire: Run 2 (2026-10-27 16:11)".
v0
2 hours ago

Example Fire: Run 2 — Perimeters by time

Built 2 hours ago
The fire's extent at each time step of the run, one polygon per step, cumulative. Filter on `hours` or `clockTime` to pick one perimeter. Written by each run of the fire simulation whose output file is "Example Fire: Run 2 (2026-10-27 16:11)".
v0
2 hours ago

Example Fire: Run 3 (2026-10-27 16:27)

Needs upload
Fire run for the simulation "Example Fire", from Simulations.
1 hour ago

Example Fire: Run 3 (2026-10-27 16:38)

Needs upload
Fire run for the simulation "Example Fire", from Simulations.
1 hour ago

Example Fire: Run 3 (copy) (2026-10-27 16:41)

Built 1 hour ago
Fire run for the simulation "Example Fire", from Simulations.
v0
41 minutes ago

Example Fire: Run 3 (copy) — Assets reached

Built 1 hour ago
Every asset the fire reached, with the minute and the clock time it did. Written by each run of the fire simulation whose output file is "Example Fire: Run 3 (copy) (2026-10-27 16:41)".
v0
41 minutes ago

Example Fire: Run 3 (copy) — Burning edge by time

Built 1 hour ago
The part of the fire's edge still burning at each time step: next to ground the front reached within the step or not yet in the black (worked out in DuckDB from the arrival and cooled tables). An edge stopped by a treatment drops out once it cools. Written by each run of the fire simulation whose output file is "Example Fire: Run 3 (copy) (2026-10-27 16:41)".
v0
41 minutes ago

Example Fire: Run 3 (copy) — Fire pathways

Built 1 hour ago
The main routes the fire took: its arrival time read like a DEM, each cell stepping back to the neighbour the fire came from, and the ways most of the burned area ran through kept. `use` counts the burned cells whose way back runs through a piece and `share` is that over all of them: the higher, the more the fire ran that way. Written by each run of the fire simulation whose output file is "Example Fire: Run 3 (copy) (2026-10-27 16:41)".
v0
41 minutes ago

Example Fire: Run 3 (copy) — Perimeters by time

Built 1 hour ago
The fire's extent at each time step of the run, one polygon per step, cumulative. Filter on `hours` or `clockTime` to pick one perimeter. Written by each run of the fire simulation whose output file is "Example Fire: Run 3 (copy) (2026-10-27 16:41)".
v0
41 minutes ago

GOVTUNIT_Alaska_State_Shape.zip

v1
3 hours ago

MTNTAOI.zip

v0
2 hours ago

MTNTLCP.zip

v0
2 hours ago

STRUCT_Alaska_State_GPKG.zip

v1
3 hours ago

TRAN_Alaska_State_GDB.zip

v0
3 hours ago
Bintel